超低钛磷鐵-ULTRA-LOW Ti Fe-P
1.SPECIFICATIONS
|
PRODUCT |
CHEMICALS |
||||||
|
P(%MIN) |
Ti(%MAX) |
Si(%MAX) |
Mn(%MAX) |
C(%MAX) |
S(%MAX) |
V(%MAX) |
|
|
ULT01 |
23% |
0.05% |
1.0% |
1.0% |
0.5% |
0.5% |
0.5% |
|
ULT02 |
23% |
0.03% |
1.0% |
1.0% |
0.5% |
0.1% |
0.3% |
|
ULT03 |
21% |
0.05% |
1.5% |
1.5% |
0.5% |
0.5% |
0.5% |
2.SIZE: 3-10MM, 10-50MM, 90% MINIMUN OR AS PER BUYER’S REQUEST.
3.PACKING: IN 1MT BIG BAGS OR AS PER BUYER’S REQUEST.
The content of titanium is lower than that of ordinary iron phosphorus. And the scope of application is smaller than ordinary phosphorus iron, because it is mainly for special steel needs and derived from a new product.
Ultra-low titanium phosphorus iron products are easy to operate and wear resistant, short melting time, but fragile; Moreover, it has important improvement effect on gas, selective oxidation, decarbonization and removal of nonmetallic inclusions in special steel.
Ultralow titanium phosphorus iron mostly meet the needs of special steel production
超低钛磷鐵相比普通磷鐵來說，钛的含量要偏低壹些；而且適用範圍也比普通磷鐵要小，因爲它主要是針對特種鋼需要而衍生出的壹種新型産品。
超低钛磷鐵産品操作便捷很耐磨、熔化時間短，但是易碎；而且對于特種鋼中的氣體、選擇性氧化、脫碳及非金屬夾雜的雜質去除等都擁有較爲重要的改良作用。
超低钛磷鐵大多滿足特種鋼生産中的需要。
